Dongguan Ruichen Sealing Co., Ltd.
TO BE O RING KING
Add to Cart
ORK Colored High Pressure Rubber Gasket Flat Ring 0.05MM - 1.2M Inner Diameter
Gasket Info :
1. products hardness can made from 30Shore A to 95Shore A.
2. Had own mold department more than 20000 size mold , Inner diameter from 0.05mm to 1.2m, C/S from 0.5mm to 20mmcan be a molding for one time shape, biggest ID can made over 6m , C/S over 30m
4. Applied industry: chemical industry, petroleum Industry, medical technique, food industry, sewage- disposal industry, steel industry, and so on.
5. Applied equipment : Mechanical sealing, pressure vessel, gas compressor, reaction vessel, heat exchanger, boiler, filter and so on.
6. Main advantage : First , excellent anti-chemical character. It almost applies to all mediums.
Second , temperature range is very wide. ( Around -50° C to 150° C )
Third , anti-compressibility function is very good.
Four , Oil proof, Alkali resistance, good elastic and long lifespan
7. Factory authentication by TS16949 and products pass : Wras / KTW-W270 / Warremark / LFGB / RoHs / Reach / FDA certificate
Product names used pressure temperature specifications
A . Nitrile rubber gasket 51 ~ 121 pressure <2.5MPa DN15 ~ DN400
B . Fluorine rubber pads -30 ~ 200 pressure <3.0MPa DN15 ~ DN400
C. Natural rubber pads -57 ~ 93 pressure <2.5MPa DN15 ~ DN400
D. Chloroprene rubber pads -51 ~ 121 pressure <2.5MPa DN15 ~ DN400
E. EPDM gasket -57 ~ 176 pressure <2.5MPa DN15 ~ DN400
F. Silicone rubber gasket -100 ~ 300 pressure <3.0MPa DN15 ~ DN400
| NBR 70 TEST REPORT ASTM D2000 M2BG 714 B14 EO14 EF11 EF21 EA14 F17 | |||
| PROPERITIES | SPECIFICATION | TEST RESULT | TEST METHOD |
| Hardness shore A | 70±5 | 72 | D2240 |
| Tensile MPA Min | 14 | 14.5 | D12 |
| Elongation % Min | 250 | 315 | D412 |
| Gravity |
| 1.263 | D297 |
| Heat resistant 70h 100℃ Hardness change | ±15 | ﹢5 | D573 |
| Tensile strength% | ±30 | ﹢15 |
|
| Elongation Max | -50 | -12 |
|
| Compression Max 22h at 100℃ | 25 | 14 | D395 |
| NO1 oil resistant |
|
|
|
| Change in hardness | -10~+5 | +1 | D471 |
| Change in tensile Max | -25 | -16 |
|
| Change in Elongation | -45 | -20 |
|
| Change in Volume% | 0~25 | +6 |
|
| Fuel resistant 70 H at 23℃ |
|
|
|
| Hardness change | ±10 | +3 | D471 |
| Tensile change Max | -25 | -8 |
|
| Elongation change Max | -25 | -10 |
|
| Change in Volume | -5~+10 | +3 |
|
| Water Resistant |
|
| D417 |
| Change in Hardness |
| +3 |
|
| Change in tensile |
| +5 |
|
| Change in Elongation |
| -14 |
|
| Change in Volume | ±15 | +3 |
|
| Low Temperature resistant |
|
| D2137 |
| 3 MIN -40℃ | Non brittle | Pass | D2137 |
