Dongguan Ruichen Sealing Co., Ltd.
TO BE O RING KING
Add to Cart
Fuel Injector Seal NBR Nitrile Rubber Fuel And Oil Resistant Black
Details show:
Fuel injector seal usually are nitrile rubber NBR o rings, which is good at fuel and oil resistant , good abrasion resistant. And nitrile rubber o ring is one kind of most cheappest o ring now.
And let's learn more about nitrile rubber NBR.
| Material | NBR(Nitrile Rubber/Buna-N) |
| Advantages | 1,Excellent Abrasion-Resistance,Good Rebound Resistance |
| 2,Good Tensile Strength and Elongation | |
| 3,Excellent Animal and Vegetable Oil Resistance | |
| 4,Good Oil and Fuel Resistance | |
| 5,Good Water Resistance | |
| Disadvantage | 1,Poor Oxygenated-Solvent Resistance |
| 2,Poor Ozone Resistance | |
| Temperature | -40℃-120℃, -55℃-120℃(special formula) |
| Application | 1,Fuel tank, lubricating oil tank and oil in the hydraulic oil, gas, water, silicone grease, silicone oil and other fluid medium rubber parts, especially the sealing parts. |
| 2,It is currently the most widely used, the lowest cost of rubber seals. |
Our advantages on o rings:
1, Wide range of dimensions:
a) Standard, including AS 568, BS 1806, French, JIS B 2401-P / G / V / S series
b) Nonstandard, we also have thousands of molds besides standard sizes.
Total o ring molds, more than 4000. ID(0.5mm~1500mm), CS(0.3mm~23mm)
2, Wide range of colors:
Black, white, blue, yellow, red, green, we can also adjust colors by color number (Pantone).
3, Wide range of materials:
NBR(Nitrile Rubber/Buna-N), SIL(Silicone Rubber), EPDM(Ethylene propylene Rubber),
FKM(fluoroelastomer FKM/FPM), HNBR (Hydrogenate Nitrile), CR/Neoprene/Polychloroprene,
SBR(Styrene Butadiene Copolyme), IIR(Butyl Rubber), PU (polyurethane rubber),
FLS (Fluorinated Silicone Rubber), FFPM(FFKM).
Certificates:
Our factory have been approved by ISO9001, TS16949, RoHs, Reach, FDA
Process Flow:
Raw material test → Prescribe → Mixing Material → Cutting Material → First Cure → First Part Inspection → Casual Inspection → Burr Dealing → Eye Inspection → IPQC → Washing or Grinding → Post Cure → FQC → Packing
Packing & Delivery:
Packing: PE bag inside, Carton outside.
Carton size: 46cm*33cm*33cm, 51cm*33cm*33cm, 29cm*23cm*19cm
Delivery: Large quantity by ship, small quantity by air or express.
FAQ:
1,Are you manufacture or trading company ?
We are manufacture, we have two factories, one located in Shangrao City, Jiangxi Province, one in Dongguan City, Guangdong Province
2,Can I get samples from you ?
Of course, you can. If the samples you need we have in stock, you can get them for free,
only need to pay for the express cost.
3,What's the term of payment ?
Amount < US$2000, 100% paid in advance by paypal or T/T;
Amount >= US$2000, 30% paid in advance, 70% balance before shipment by T/T.
4,Can you produce OEM products ?
Yes, we can produce products by your drawing or samples.
5,What's your MOQ ?
If we have the products in stock , the quantity by your requirement, If we don't have them in stock:
NBR, SIL, SBR, EPDM, NR: 100 US$; PU, HNBR, FKM: 150 US$